How to do car wiper abnormal sound

How to do car wiper abnormal sound

What kind of problems are caused by the abnormal sound of the wiper? How can we solve it? Let us help you.

1. If it is when it is up, then it means that the wiper frame is twisted upwards, so that the wiper is stopped in the middle position (the steering wheel pulls the wiper control handle after turning off the car), and then gently pull it up with a cloth or something soft Wrap the steel frame and use a spanner or pliers to hold the wrapped part down and twist it a few times. After the reset, scrape and try. Is the abnormal sound small? If yes, repeat it until the noise disappears. If it begins to go down, it means that the wrench is over-twisted and it needs to be twisted in the opposite direction. Until abnormal noise is eliminated!

2. If it is going down, it means that the wiper frame is twisted downwards. After the wiper is parked in the middle, it is set up. Use a cloth or soft thing to wrap the steel frame and use a wrench or pliers to hold the package. Twist the wrench a few times and try to scrape after the reset. Is the abnormal noise small? If yes, repeat it until the noise disappears. If it becomes the upper line and it starts to ring, it means that the plate has been twisted too much and it needs to be twisted in the opposite direction. Until abnormal noise is eliminated!

3. Careful and patient operation is required. You can't use it too hard, so as not to get into worse troubles, it's best not to be afraid of trouble. Take out the boneless wiper and operate it. If you do not have any experience in this area, or go to the 4S shop, let them tune in accordance with this principle will generally solve the problem.

4 If a single wiper blade has abnormal sounds when it is up and down, it is time to change the wipers!

Cabinet Dryer

Cabinet Dryer,Drying Machine,Industrial Laundry Dryer ,Industrial Washer

Plastic Crushing Recycling Seires Co., Ltd. , http://www.nbtemperature.com