How to maintain summer sprinklers in Hunan, Hubei and other places?

In the summer, the maintenance of sprinklers needs more attention, and the owners of vehicles in many ways to ensure the safety of vehicles. Hubei Cheng Li sprinkler manufacturers warmly reminded, “The hot weather has a great impact on the sprinklers. At present, the vehicles that drive on the expressway are fully enclosed air-conditioned vehicles. The air conditioning system is inspected very strictly to avoid oxidation of the terminal posts and the connection of the nodes. And so on.
Hubei Chengli Sprinkler Factory also emphasized that, “When you drive in summer, you must avoid ingress of water into the air intake system. If the air filter is damp, the intake air is blocked, then the vehicle will become faster and weaker; in severe cases, under the effect of high temperatures. The moisture entering the engine will increase the rust effect of the engine's internal moving parts and directly affect the engine performance.

In addition, experts from Hubei Chengli Sprinkler Factory believe that tire pressure problems are very important for driving safety. In summer, tires should be inspected frequently to avoid the occurrence of punctures. Tyre pressure changes with the ambient temperature. Generally, for every 10°C increase in temperature, the tire pressure will increase by about 7 to 14 kpa. In the scorching summer, the tires are in contact with hot surfaces. If the tire pressure is high, it is likely to cause a puncture, so keep the standard tire pressure down at high temperatures, and the speed should not be too fast.

How to maintain the summer sprinkler, the following points for the maintenance of summer tips:
1. Check whether the air conditioner is deficient in fluoride air-conditioning is the more frequent use of parts in the summer, but also the most prone to failure, it is recommended that you must check whether the car's air conditioning is in the absence of fluoride. Under normal circumstances, the lack of refrigerant is one of the reasons for the failure of air conditioning. Second, check for leaks. Generally there are glass observation holes on the drying tank, and the conditions of the bubbles can be initially determined from the flow conditions. Finally, check whether there is a shortage of frozen lubricant.
2. Try to avoid prolonged driving under long-term driving conditions. Care should be taken to take a rest when driving. When parking, try to choose a cool and ventilated place. If the conditions permit, you can also open the hood to ventilate and cool. If the pointer on the thermometer has been pointed to a high temperature zone, the car must be stopped and "reheated," gradually cooling the engine. If necessary, you can also use cold water to pour on the radiator. Be careful not to wet the circuit.
Tip: You'd better develop a good habit of cleaning the radiator regularly, which can improve the engine's cooling effect, it can also reduce the engine to produce overheating. When performing maintenance, pay attention to the fan belt can not stick oil, to prevent slipping.
3. High-temperature road tire pressure will increase in summer due to hot weather, high temperatures, so sprinklers must not carry flammable and explosive materials, and try not to smoke in the car, so as to avoid a fire. Before the vehicle travels, check whether the oil line joint is leaking, whether the exhaust pipe is shot, etc. If there is a problem, it should be repaired immediately; pay attention to keep the vent hole of the battery unblocked. Summer road surface temperature is often above 70 degrees Celsius, car tires such as long time in the high temperature road, the tire pressure increases, this time if the tire is damaged or weak place is prone to puncture. There is a great danger to humans.

Therefore, use the watering truck in high temperatures in summer. Be sure to keep in mind the above points. In addition, you should always check the dashboard of the vehicle to see if there are any abnormalities.

Stainless Steel Deep Drawing

Nanpi Jiantong Hardware Manufacturing Co.,Ltd. offers a wide range of Deep Drawing services.

Material grade: stainless steel 304, stainless steel 316

                     steel DC01,DC04,ST12,Q235,SJ235R

                     galvanized steel sheet DX51D

Stock thickness ranges from 0.30mm-6.0mm for stainless steel

                                        0.30mm-3.0mm for copper

                                        0.30mm-6.0mm for aluminum

                                        0.20mm-6.0mm for carbon steel

Surface finishing: polishing, satin blasted,powder coating, electro plating,anodize

Application: motor housing, metal cover, caps etc. 

Stainless Steel Deep Drawing

Stainless Steel Deep Drawing,Coustom Stainless Steel Deep Drawing,Stainless Steel Drawing,Drawing Stainless Steel

Nanpi Jian Tong Hardware Manufacturing Co., Ltd. , http://www.sheetmetals.nl