KCB stainless steel gear pump features

KCB stainless steel gear pump uses KCB stainless steel gear pump is mainly used in a variety of mechanical equipment in the lubrication system for transportation of lubricants for conveying viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt), temperature Lubricated oils below 300 ° C. Stainless steel gear pump, can deliver non-lubricating oil, beverage, low corrosive liquids. Equipped with copper gear can deliver low-point liquid, such as gasoline, benzene and so on. In addition to this series of stainless steel pump configuration common motor, but also according to user needs with the specifications of the explosion-proof motor configuration. Material: 304.316.316L stainless steel.
KCB stainless steel gear pump scope of application in the oil transmission system can be used as transmission, booster pump;
In the fuel system can be used as delivery, pressure, jet fuel pump;
In all industrial areas, can be used for lubricating oil pump.
KCB stainless steel gear pump structural features KCB stainless steel gear pump gear, shaft, pump body, safety valve, shaft seal composed of the end. The gears are heat-treated to a higher hardness and strength and mounted with the shaft in a replaceable hub. The lubrication of all parts in the pump is automatically achieved using the output medium while the pump is in operation.
KCB stainless steel gear pump has a well-designed drain and return tank, the gear in the work to withstand the torque of the smallest, so the bearing load, wear small, high pump efficiency.
KCB stainless steel gear pump with safety valve as overload protection, safety valve full back pressure of the pump rated exclusion pressure of 1.5 times, but also allows the discharge pressure within the scope of the actual need to be adjusted. But note that the safety valve can not be used for long-term work of the valve, if necessary, can be installed separately in the pipeline.
From the spindle extension to the pump to see, clockwise rotation.
Large flow gear pumps, gear pumps, pumps, pumps, crude pumps, marine gear pumps.
Flow: 1.1m3 / h-600m3 / h Pressure: 0.28MPa - 2.5MP.
KCB stainless steel gear pump is mainly used for oil, oil depots, ports, docks, ships and other large flow oil, unloading!

Brass Valves

Fenghua Jade Motor Co., Ltd. , http://www.yonlin-ballvalve.com