Nowadays, some people are more respected and foreigners, more and more people are pursuing Western lifestyle, such as ": Morning or evening drink a glass of milk." This has increased the market for the dairy industry and, as a result, it has also increased the scale of dairy cows, especially the development of livestock farming communities. Having a milking truck is an important role in changing the milking operation model in the past. Especially for those large-scale farmers, it is even more powerful! Mobile milking trucks are suitable for users of small dairy farms and individual free-range dairy cows. The single barrel type squeezes one cow at a time, and the double barrel type can squeeze two cows at a time. Each cow has a milking time of 5 to 8 minutes. Compared to traditional artificial milking, time is faster. The single-barrel type is suitable for use by 15 or less dairy cows. The double-barrel type is suitable for 20 to 30 cows. The one-to-many approach has been adopted, and the efficiency has also improved a lot. This milking truck is a set of vacuum pump, milk cup set and milk bucket on a vehicle, which has the advantages of movable operation, economy, convenience and the like. Milking trucks are the basic requirements for the safe production of agricultural products in modern agriculture. In the action of the pollution-free agricultural products organized and implemented by the Ministry of Agriculture, it has been stipulated that mechanized milking should be implemented. Foreign developed countries have all implemented mechanized milking. Mechanized milking trucks are designed based on the principle of the calf sucking process, which not only helps to ensure the quality of raw milk, but also increases milking, saves labor and increases farmers' income. Milking trucks are divided into pneumatically controlled valve type, piston type and solenoid type. The pneumatic controlled pulse type milking truck has a pneumatically controlled pulse valve fixed on the lid of the milk canister, generates a pneumatically controlled pulse pressure through the valve, and completes the sucking action, and has a simple structure and a light weight, and the piston type Compared with the milking truck, the weight is reduced by half, the power consumption is reduced by 52%, and the cost is reduced by more than 30%. Compared with the electromagnetic valve type milking truck, the electrical components are omitted, the safety and reliability are greatly improved, and the leakage and electric shock accidents are eliminated. happened. At present, there are three types of mechanized milking equipment in the market, including milking equipment for halls, milking equipment for pipelines and small milking trucks. Farmers should use different mechanized milking modes depending on the size of the breeding and the requirements for the automation procedures, and how much money they need.
The internal structural design is vane, Vane Damper is more suitable for soft close. ABD vane dampers are used to dampen drives, control speed, and many other applications. The damping direction of the vane dampers with continuous rotation can be clockwise, counter clockwise, or in both directions. Vane dampers are widely used in automobile interior decoration, household electric appliances, furniture and bathroom products, etc. Our dampers can make the movement of structures soft, quiet and safe to mitigate the impact, avoid the damage, increase the mechanical life, reduce noise, and improve product quality.
NOTE:
1. Please contact the corresponding product engineer for specific torque products.
2.The Standard of completion closing:the angle is 90° between Shaft A and Shaft B.
3.It is closing position to assemble the shaft into the housing.
4. Max. cycle rate: 3 cycles/min(Clockwise110 °, 110 ° anti-clockwise for 1 cycle)
5.Operating temperature:0~40℃
6.Storage temperature:-10~60℃
Soft closing time test: Measure the closing time from angle 70 to 0.
Rated Torque (T).
Test Temperature: 23±2℃.
Durability test:
Test Method: From the closing position to opening position, push back to 70°, soft close from 70° to 0°.
Rated Torque (T).
Operation Angle: 0°~110°.
Test Temperature: 23±2℃.
Durability test cycle: 50,000 cycles. The result of product test )>2s.
Vane Damper Vane Damper,High Temperature Dampers,Toilet Seat Vane Damper,Soft Down Damper,Storage Boxes Vane Damper Shenzhen ABD Equipment Co., Ltd. , https://www.abddamper.com
When the axis of rotation is moving, the blades that are connected to the axis of rotation rotate at the same time. The silicone oil in the oil chamber is squeezed between the blade andthe body to the back of the blade. The resistance formed by the pressure of the silicone oil to the area of the blade is the damping torque of the rotating shaft and the blade. The torque generated during rotation is determined by the oil viscosity, the pressure area of the blade and the clearance between the blade and the body.
