Water cutting is an internationally recognized method of cutting

Water cutting has many advantages. It is recognized by all. Ultra-high pressure water jet cutting is a new cold cutting process. Compared with other cutting methods, the most important feature is the non-heat source high energy jet processing, and there is no thermal process in cutting. No thermal effects are produced on the cut surfaces of all materials. Therefore, almost all metal and non-metal materials can be cut, especially for materials that are difficult or impossible to process in a variety of thermal cutting methods, and they can show their unparalleled advantages.

1) Due to the cooling effect of water, the temperature rise of the workpiece being cut is very small, the temperature in the incision (including the cutting surface) is lower than 60°C, no thermal deformation and heat affected zone are generated, and therefore the material and performance of the cut material will not be changed. .

2) The quality of the incision is high, there are no burrs, slag, cutting surface vertical, flat, good finish. And there is no tearing or strain hardening phenomenon, the thin metal plate cutting edge does not occur the phenomenon of rewind.

3) The width of the incision is small, and the width of the incision is about 0.5-1mm. The sound of cutting in the nesting material is beneficial to improve the material utilization.

4) It does not produce toxic gases and dust that are harmful to human health, and is particularly suitable for asbestos, wool fabrics, and various fiber synthetic materials.

5) For areas where open fire operations are strictly prohibited, the processing of inflammable and explosive materials such as nuclear materials, offshore oil drilling and production platforms, oil refineries, large oil and gas storage tanks, and oil and gas transmission pipelines can be safely cut. In particular, with the increasing application of carbon fiber, glass fiber, and honeycomb structural composites in aerospace and new energy fields, traditional cutting methods such as flame, laser, and plasma have been unable to complete, and water cutting is currently the only internationally recognized method. Ideal cutting method.