The plots of T2010P04 and T2010P05 in Shangcheng City

Project Name: Zhangzhou •; T2010P04 Land at Xidi Shangcheng; Luzhou•; T2010P05 Land at Xidi Shangcheng (2011–2012, total project investment is unknown)
Region: Fujian Progress: Environmental Impact Assessment Construction Period: 2011-2012 Major equipment: cranes, firefighting facilities, security facilities, water supply and drainage facilities, electrical facilities, ventilation facilities, and lighting facilities.
Project Profile: The project is located on the northern side of the film and television city of Wuxiannan Film Region 12-07, Tongan District. The total land area is 284,413.62 square meters (including 157,886,018 square meters of T2010P04 and 126,527,44 squares of T2010P05), with a total construction area of ​​512,599. 999 square meters (including 387,601,419 square meters of T2010P04 plots, 232,914,09 square meters of T2010P05 plots), among which the T2010P04 plots of No.1, No.2, No.4, and No.5 plots of Yancheng The four sub-blocks are composed of a series of high-rise residential buildings, multiple 2-storey to 3.5-floor floors, multi-storey residential buildings, a 90-storey four-storey kindergarten and street-level supporting commercial storefronts, fresh supermarkets, and equipment houses. Basement; Cangzhou•; Xidi Shangcheng’s T2010P05 plot consists of 3 sub-blocks of No. 3, No. 6, and No. 7, with multiple high-rise residential buildings, multiple 2-storey to 3.5-floor floors, and multiple designs. Floor dwellings, a three-story cultural and arts exhibition hall, a 90-storey four-storey kindergarten and ancillary commercial shops along the street, restaurants, film and television exhibition halls, fresh food supermarkets, equipment rooms, and basement rooms. The total project investment is unknown.

Construction Unit: Xiamen Zhangzhou Real Estate Development Co., Ltd. Postal address: North of Movie and Television City, 12-8 Wuxiannan District, Tongan District Postcode: 361100
Contact: Mr. Zhou Tel

Design institute: Fourth Design Institute of Mechanical Industry (EIA)
Postal address: No. 13 Xiyuan Road, Luoyang City, Henan Province, China Postcode: 471039
Contact: Xiao Yang Telephone Fax

Related Developments: Tower Crane Infrastructure Project


The internal structural design is vane, Vane Damper is  more suitable for soft close. ABD vane dampers are used to dampen drives, control speed, and many other applications. The damping direction of the vane dampers with continuous rotation can be clockwise, counter clockwise, or in both directions. Vane dampers are widely used in automobile interior decoration, household electric appliances, furniture and bathroom products, etc. Our dampers can make the movement of structures soft, quiet and safe to mitigate the impact, avoid the damage, increase the mechanical life, reduce noise, and improve product quality.


When the axis of rotation is moving, the blades that are connected to the axis of rotation rotate at the same time. The silicone oil in the oil chamber is squeezed between the blade andthe body to the back of the blade. The resistance formed by the pressure of the silicone oil to the area of the blade is the damping torque of the rotating shaft and the blade. The torque generated during rotation is determined by the oil viscosity, the pressure area of the blade and the clearance between the blade and the body.
Vane Damper



NOTE:

1. Please contact the corresponding product engineer for specific torque products.

2.The Standard of completion closing:the angle is 90° between Shaft A and Shaft B.

3.It is closing position to assemble the shaft into the housing.

4. Max. cycle rate: 3 cycles/min(Clockwise110 °, 110 ° anti-clockwise for 1 cycle)

5.Operating temperature:0~40℃

6.Storage temperature:-10~60℃



Vane Damper Characteristics

Soft closing time test: Measure the closing time from angle 70 to 0.

Rated Torque (T).

Test Temperature: 23±2℃.

Durability test:

Test Method: From the closing position to opening position, push back to 70°, soft close from 70° to 0°.

Rated Torque (T).

Operation Angle: 0°~110°.

Test Temperature: 23±2℃.

Durability test cycle: 50,000 cycles. The result of product test )>2s.

 

 

Vane Damper

Vane Damper,High Temperature Dampers,Toilet Seat Vane Damper,Soft Down Damper,Storage Boxes Vane Damper

Shenzhen ABD Equipment Co., Ltd. , http://www.abddamper.com