Hello,Iam Jaminy from S&A chiller factory
CONTACT S&A
TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE:
teyuchiller
Email:
Website: http://
Transfer Printing Paper,Luxury Printing Paper,Cartoon Heat Transfer Printing Paper,Excellent Quality Printing Paper SHAOXING HONEST IMP&EXP.CO.,LTD , https://www.transfer-printed.com
The troubleshooting of flow alarm of S&A chiller CW-6000
Now, I will show you the troubleshooting
CW-6000,
Regarding the flow alarm of S&A chiller CW-6000
CW-6000
When the flow alarm ocuurs
E6
The panel will display E6 alarm code
,
The error code and the temperature will be alternately displayed
ALM OUT
The "ALM OUT" on
It means alarm output status
The alarm sound could be suspended by pressing any button
The troubleshooting of flow alarm as below
,
Firstly, turn off the power supply of machine
Connect a water hose between water inlet and water oulet
,
Turn on the machine and observe the working status
If alarm suspends
The outside water circulation pipe is blocked
()
The water circulation pipe gets bended or blocked
Check the outside water circulation pipe
If the chiller remains alarm
:
The cause as below
1.
1.Water level inside the tank is too low
Check the water level gause display
Add water until the level shown in the green area
And check whether water circulation pipe leaks
2.
2.Internal water circulation pipe is blocked
Check the internal water circulation pipe
3.
3.The parts of chiller fault
Feel free to contact S&A after-sales dept.
!
Thanks for using S&A chiller