First, check the operation, there should be no abnormal knocking sound inside the crusher. Special circumstances should be stopped immediately. The grain size of the ore should not be more than 0.8 times that of the ore supply. The lower part of the discharge chute and the crushing cone should not be blocked by the ore. Otherwise, the ore will lift the ore powder into the eccentric bushing, causing an accident. Second, pay attention to the operation of the oil pump, often check the oil flow indicator, oil temperature and oil pressure indications. The temperature of the oil after passing through the cooler should not be higher than 45-53 ° C, the return oil temperature should not be higher than 60 ° C, and the oil is supplied to the upper suspension device on time. Third, pay attention to check the tightness of the V-belt, use the thumb to press the V-belt to measure the tension, if the pressure is not more than 1.5 cm, the elastic is appropriate (measure must be before driving or after parking). Check for cracks and be careful not to get oil on the V-belt. 4. Always check whether the connecting pin between the beam, the middle frame and the base is loose and whether the gap is 15 mm along the circumference of the garden. 5. Check whether the lining boards of each part are loose, lacking and severely worn. Sixth, strict inspection to the mine situation, and to prevent the hammer, drill a top metal objects into the crushing chamber. 7. Accidents occur during operation. If the chute is blocked by ore, the oil is stopped or the oil temperature exceeds 60 °C and the bevel gear has a knocking sound. It should be immediately stopped according to the prescribed procedures.
Universal Exhaust Catalytic Converter is
installed in the automobile Exhaust System and is one of the most important gas
purification device. It can turn the harmful car exhaust such as carbon
monoxide (CO), hydrocarbon (HC) and nitrogen oxides (NOx) by redox reaction into harmless carbon dioxide
(CO2), water (H2O) and nitrogen (N2). Through this way, the car exhaust become
harmless to people and environment.
We produce high quality of Universal High
Performance Auto Engine Exhaust Catalytic Converter With competitive prices. We
maintain a well-organized and effective assembly line, starting from the
cordierite ceramic honeycomb-like substrate, applying wash-coat with
precious-metal (Platinum, Palladium and Rhodium) catalyst onto the surface area
inside the honeycomb substrate, and protect the finished product in metal
shells.
Feature
l Ceramic substrate 400 CPSI
l Metallic substrate 100 and 200 CPSI
l Euro Emission Standards
l According to customers` ratios
l Stainless Steel 304 or 409 outshells
Universal Catalytic Converter Universal Catalytic Converter,Performance Catalytic Converter,Diesel Catalytic Converter,Universal Exhaust Catalytic Converter JINING FAREAST LIANGFEI CONVERTER & MUFFLER CO. LTD , https://www.golbaltour.com
What should you pay attention to when rotating the crusher?
When the crusher enters normal crushing work, the following items must be observed and observed during operation: