The first safety performance, many people see the feeling of a sharp car is a word: ugly, but ugly does not mean it is useless right. Sitting in the driver's cab, the driver's cab feels that the front of the cab is a driver's eye. He has a lot of blind spots to drive and has low visibility on the road. However, in the event of a traffic accident, the safety factor of the pointed car is much higher than that of the flat car. The tip of the pointed car will play a buffer role. The second cost-effective, after all, to buy a car is to spend a lot of money, so many people buy a car when the price is placed in the first place. Flat cars are generally more expensive than sharp cars. The third driving environment, the same tonnage of vehicles, sharp car turning radius than the flat car. The sharp car at the small intersection is likely to make life difficult. The fourth maneuverability, the flat-headed car is much more flexible than the pointed car, and the handling performance is excellent, especially reflected in the long car. The above is just my personal opinion of the tip car and the flat car, but the vehicle is only a tool for making money. It must not be sloppy in terms of its own safety. Whether it is a pointed car or a flat car, careful driving is your protection. The only magic weapon .
Honing
the hydraulic cylinder is in of the inside hole by blank hot-rolled
tube processing, key performance indicators are: such cylinder material,
tensile properties, yield strength, elongation, surface hardness,
diameter tolerance, inner hole, inner hole straightness, roughness
material usually have 20 #, 45 #, 16 mn, ST52, such as material, the
whole steel tube do heat treatment is to stress relieving, outer surface
with acid pickling phosphating after anti-rust oil daub antirust
processing, is done in the large deep hole boring cutter adopts: rough
boring cutter, half fine boring cutter, boring cutter, rolling cutter
head combined four monomer, rolling pressure head at the last surface
under stric extrusion molding, to achieve expected diameter size
tolerance, inner hole surface of high strength, high degree of finish,
high resistance to wear.
Hydraulic Cylinder Honed Tube,Cylinder Barrel Honed Tube,Cylinder Barrel Honed Tube,Hydraulic Stainless Cylinder Honed Tube Yangzhou Yinhe Machinery Co., Ltd , http://www.yinhesteeltubes.com
Contrast between sharp car and flat car, respective advantages and disadvantages
Now people buy trucks do not consider whether the front of the car is pointed or flat, both cars have their own advantages and disadvantages.