Our Diesel Water Pump Set,can be choose Deutz/Cummins/Ricardo Diesel Engine Driven Self-Priming Pump Set For Irrigation(Manufacturer)/Water Pump Generator/Hose Pump/Water Pump Set
Product introduction:
P series self priming non-clog centrifugal sewage pump is a new generation product which develop on the basis of the lastest technology and craftwork. Because of the reliable performance, its life lasts more than 20 years.
We take special usage of the sewage pump into consideration on design, so we add a hole to make sure that stronger sewage can be cleaned quickly when pump is jammed.
The unique lubrication oil mechanical seal cavity makes the performance more reliable and avoids to damage mechanical seal when it operates without water. To ensure a smooth operation, low noise, long life, all the main components such as imported bearing, to overcome the traditional inherent shortcomings such as low flow rate capacity, difficult to install, difficult maintenance and frequent failure.
P series self-priming Pump has the character of strong anti-clogging. In order to avoid towels, bags and so long fiber pollution caused by debris blocking the sewage pump sewage poor. We Design will cut down pollution-pore structure In front of the pump to ensure that the debris can be cleared more quickly.
There is a big vortex chamber play important role. It is no need to equip check valve in the inlet and outlet to sewage efficiently when the pump separately completely.
Main usage:
1. Municipal Project, Sewage Project, Instruction Project
2. Transportion of the sewage of uptown
3. Sewage transportion in Hospital, hotel and so on
4. Classification of municipal sewage treatment factory and concentrate treatment systems engineering.
5. Transportation of the factory and contaminated water
Operation condition:
1. The temperature of medium no more than 80° C, the density of medium is 1.0~1.3*103 Kg/m3, PH is within 5~9,
2. Max diameter of solid should be less than 75 mm,
3. Max suction lift no more than 7 m Diesel Water Pump, Diesel Engine Water Pump, Diesel Engine Water Pump Set, Diesel Water Pump Set Weifang Huatian Diesel Engine Co., Ltd , http://www.higenset.com
This series universal testing machine UTM designed of PC display and manual drive hydraulic loading system, main Engine controller separately fixed. It has the characteristics of operation amenity, working steady, high accuracy and loading steady. It is used to stretch, compress, curve and cut metal cement, concrete, plastics and so on.
2. Function
It is cylinder underneath type with double testing spaces structure. It can do many kinds of test, like tensile, bending, compression, shearing, and so on.
3. Structure
The main engine consist of an adjustable support (base, screw thread pole, moveable crossbeam (lower clamp set)) and a working frame (working oil tank, piston, platform, support crossbeam (upper clamp set)). Element of the machine: High-pressure oil pump supply oil to the working oil tank, the piston moves and press board and upper crossbeam to do stretch and press test. The stretch test is done in the space between upper crossbeam and movable crossbeam. The life motor, gear, chain drive rotate at a same speed to move the crossbeam.
4. Software
(1) The secrete two-grade authorization managemant
(2) Motion display load, position, tensile at the same time
(3) Load, position, tensile peak value display during the test and after
(4) Motion display load, position, tensile when testing
(5) Motion X-Y curve and user curse: Pressure-tensile, load-position, pressure-position, load-tensile, load-time, position-time, and so on.
(6) Automatically save the sensor information in doc
(7) Automatically save the test result for statistical calculation and output to data sheet and data base program, like ACCESS and EXCEL.
(8) Single page printing for the test report, including X-Y curve.
(9) Select from the analysis of predefined: Load peak value, pressure peak value, tensile strength, RP0.2, Rt0.5, ReL, value of extending to fracture value (manual and automatic), and so on
(10) Detail instruction, save and inquiry test setting to min. Error and save the time
(11) Units: N, kgf, lb, mm, in, or others
(12) Calibrating: Adjust the hardware like measuring cell by software
(13) Grip device: People can change the common movable jaw to fit the different width when doing the tensile test. Same for bending and compression test device.
Model & specification
WEW-300B
Max. test force (KN)
300
Measuring range (KN)
4%-100% F.S.
Relative error to force value (%)
±1
Distance between compression surfaces (mm)
0-600
Max. distance between tensile jaw (mm)
0-600
Bending test pressed rolling distance (mm)
30-460
Clip diameter of round sample (mm)
10-32
Clip thickness of flat sample (mm)
0-15
Width of flat plate specimen (mm)
≤60
Size of shearing specimen (mm)
0-10
Effective distance between the pillars (mm)
435
Piston stroke (mm)
150
Motor power (kW)
2.2+0.55
Main frame outline dimension (mm)
760×460×1965
Oil source control cabinet outline dimension (mm)
1080×650×1200
Weight (about) (Kg)
1700
Â
Computer Display Universal Testing Machine (WEW-300B)
1. Introduction